Inovonics TapWatch 3 - Manual (Page 26)

Site Information
05855E 25
4.2 Buildings
This screen shows the building name, the number of units, and any notes
associated with each building.
Figure 4-2 Buildings Screen
4.2.1 Add New Building
To add a new building:
1. Navigate to File > New > Building; or, click on the asterisk below the last
building listed.
2. Fill in the necessary fields.
3. When complete, press the Enter button on the keyboard.
4.2.2 Synchronize Data with the Data Logger
Data synchronized includes meter reads, site configuration, and exceptions.
Newer data always overwrites older data, so be sure you are not overwriting
changes made on the other end of the synchronization. The easiest way to
make sure of this is to perform a synchronization before making any changes,
ensuring that you start with the newest data in your software and data logger.