Inovonics TapWatch 3 User Manual
Page 55
Site Information
05855E
54
• If you are performing a synchronization where there are site configuration
updates in both TapWatch 3 and the data logger, TapWatch 3 will ask you
which updates to keep. Forced Retrieve will keep the updates from the
data logger; Forced Publish will keep the updates from TapWatch 3. In
most cases it is recommended to click Forced Retrieve.
• If you try to synchronize data with a site that is not registered to
TapWatch.com but which has been selected as a TapWatch.com site on
the Settings screen, a window with a list of blank data loggers will display.
Highlight the appropriate data logger and click Publish.
• If you are publishing to a blank data logger, you will be prompted that
TapWatch 3 detects a site configuration change. The recommended
action is to click Publish.
To synchronize data with the data logger:
1.
Navigate to File > Connect > Sync; or, click on the Connect/Sync button.
2.
Synchronization progress will display in the status bar.
4.7.2.11 Export Reads
Navigate to File > Export > Check-In Monitor to export a file containing all
check-in monitor information for the selected property.