Inovonics TapWatch 3 User Manual
Page 50
Site Information
05855E
49
4.7.1.3 Show Unregistered
Select this to include messages from unregistered devices.
4.7.1.4 Pause Incoming
Select this to pause the display of incoming messages received by the RF
gateway.
4.7.1.5 Timestamp
Displays the date and time when the message was received by the RF
gateway.
4.7.1.6 Building/Repeater
Displays the building/repeater for the registered device.
4.7.1.7 Unit
Displays the unit for the registered device.
4.7.1.8 Util Type
Displays the type of utility for which the registered device is providing the read.
4.7.1.9 Utility Type
Displays the utility type of the registered device.
4.7.1.10 TXID
Displays the identification number of the repeater or transmitter that sent the
message.
4.7.1.11 TX Count
Displays the total number of the transmitter’s pulse counts.
4.7.1.12 Status
Displays the status of the transmitter that sent the message.
• OK - indicates the transmitter is operating as it should be.
• A - indicates the repeater is not receiving AC power.
• B - indicates the transmitter has a low battery.
• F - indicates the transmitter is in rapid transmit mode.