Inovonics TapWatch 3 User Manual
Page 63
Advertising
Scheduler
05855E
62
2.
To use the default backup location, click Save; to back up elsewhere,
navigate to a new location.
5.3.2 Run Event(s) Next
The run event next command is used to force the selected event to the top of
the queue:
1.
Navigate to File > Run Event(s) Next.
2.
The selected event will be moved to the top of the queue.
5.3.3 Status
Displays whether the event is active or pending.
5.3.4 Timestamp
Displays the time when the meter read upload will start.
5.3.5 Action
Displays the type of action.
5.3.6 Group
Displays the group to which the property belongs.
5.3.7 Property Name
Displays the name of the propery.
5.3.8 Property ID
Displays the ID of the property.
Advertising