Inovonics TapWatch 3 User Manual

Page 59

Advertising
background image

Site Information

05855E

58

• If you are performing a synchronization where there are site configuration

updates in both TapWatch 3 and the data logger, TapWatch 3 will ask you
which updates to keep. Forced Retrieve will keep the updates from the
data logger; Forced Publish will keep the updates from TapWatch 3. In
most cases it is recommended to click Forced Retrieve.

• If you try to synchronize data with a site that is not registered to

TapWatch.com but which has been selected as a TapWatch.com site on
the Settings screen, a window with a list of blank data loggers will display.
Highlight the appropriate data logger and click Publish.

• If you are publishing to a blank data logger, you will be prompted that

TapWatch 3 detects a site configuration change. The recommended
action is to click Publish.

To synchronize data with the data logger:

1.

Navigate to File > Connect > Sync; or, click on the Connect/Sync button.

2.

Synchronization progress will display in the status bar.

Advertising