4 repeaters – Inovonics TapWatch 3 User Manual
Page 32
Site Information
05855E
31
4.4 Repeaters
Figure 4-4 Repeaters Screen
This screen shows information for repeaters on the selected property,
including repeater location, unique identification number, and notes.
4.4.1 Add New Repeater
1.
Navigate to File > New > Repeater; or click on the asterisk below the last
repeater listed.
2.
Fill in the necessary fields.
3.
When complete, press the Enter button on the keyboard.
4.4.2 Synchronize Data with the Data Logger
Data synchronized includes meter reads, site configuration, and exceptions.
Newer data always overwrites older data, so be sure you are not overwriting
changes made on the other end of the synchronization. The easiest way to
make sure of this is to perform a synchronization before making any changes,
ensuring that you start with the newest data in your software and data logger.