Inovonics TapWatch 3 - Manual (Page 44)

Site Information
05855E 43
4.6.2.6 Meter ID
Displays the unique identification number of the meter.
4.6.2.7 TX Model
Displays the Inovonics part number of the transmitter.
4.6.2.8 TxID
Displays the unique identification number of the transmitter providing the read.
4.6.2.9 Received
Displays the date and time when the read was received.
4.6.2.10 Count Factor
Displays the number of units which each meter pulse represents.
4.6.2.11 IMC
Displays the initial meter count when the meter was installed or last serviced.
4.6.2.12 Count
Displays the count of meter pulses at the time of the read.
4.6.2.13 Total Flow
Displays the total flow of the meter at the time of the read.
4.6.2.14 Status
Displays the status of the transmitter.
• OK - indicates the transmitter is operating as it should be.
• B - indicates a low battery.
• I - indicates the transmitter is inactive.
• T - indicates the transmitter has been tampered with.
• R - indicates the transmitter has been reset.
4.6.2.15 Synchronize Data with the Data Logger
Data synchronized includes meter reads, site configuration, and exceptions.
Newer data always overwrites older data, so be sure you are not overwriting
changes made on the other end of the synchronization. The easiest way to