Inovonics TapWatch 3 User Manual
Page 52
Site Information
05855E
51
• If you try to synchronize data with a site that is not registered to
TapWatch.com but which has been selected as a TapWatch.com site on
the Settings screen, a window with a list of blank data loggers will display.
Highlight the appropriate data logger and click Publish.
• If you are publishing to a blank data logger, you will be prompted that
TapWatch 3 detects a site configuration change. The recommended
action is to click Publish.
To synchronize data with the data logger:
1.
Navigate to File > Connect > Sync; or, click on the Connect/Sync button.
2.
Synchronization progress will display in the status bar.
4.7.1.16 Export Reads
Navigate to File > Export > Export Com Port Sniffer to export a file containing
all Com Port Sniffer information for the selected property.
4.7.1.17 Enable RF for Registration and Com Port Sniffer
To enable the RF gateway for end device registration and the Com Port
Sniffer:
1.
Navigate to File > Connect > Enable RF; or, click on the Enable RF
button.
Note:
If you try to enable RF to a site that is not registered to TapWatch.com but which
has been selected as a TapWatch.com site on the Settings screen, a window with
a list of blank data loggers will display. Highlight the appropriate data logger and
click Select.
2.
Once a message displays in the status bar that your RF gateway is
remotely connected, RF messages will begin to appear.