Inovonics TapWatch 3 - Manual (Page 30)

Site Information
05855E 29
Note: If you try to enable RF to a site that is not registered to TapWatch.com but which
has been selected as a TapWatch.com site on the Settings screen, a window with
a list of blank data loggers will display. Highlight the appropriate data logger and
click Select.
2. Once a message displays in the status bar that your RF gateway is
remotely connected, RF messages will begin to appear.
4.3.3 Export Unit List
The unit list can be exported as a spreadsheet. To export the unit list:
1. Highlight a unit and navigate to File > Export > Export Unit List; or, right
click anywhere on the list of properties and select Export Unit List.
2. To use the default location, click Save; to save the file elsewhere,
navigate a new location.
4.3.4 Building
Displays the building name to which the unit is assigned.
4.3.5 Unit
Click to enter or edit the unit number.
4.3.6 TXID
The TXID field displays the factory coded unique identification number of
registered Inovonics transmitters. This field is also used for registration.
To register an Inovonics transmitter:
1. Click the enable RF button to connect to the Inovonics RF gateway.
2. Click on the appropriate TXID field. The system enters registration mode,
and a message appears on the bottom of the screen informing you that it
is waiting for a reset message from the Inovonics transmitter.
3. Press the reset button on the Inovonics transmitter. The TXID field will
populate with the transmitter’s unique identification number.