Inovonics TapWatch 3 - Manual (Page 61)

Scheduler
05855E 60
5.2 Calendar
The calendar screen is used to view meter reads as scheduled by group
events. To use the calendar, you must first create a group containing at least
one property. This is done on the groups screen.
Figure 5-1 Calendar Screen
5.2.1 Add a New Event
To schedule the TapWatch 3 software to synchronize site configuration, reads,
and exceptions with the data loggers at a group of properties.
To add a new event:
1. Navigate to File > New > Event; or, rightclick on any date on the calendar
and select New > Event.
2. Select a start time.
3. Select the group..
4. If you want the synchronization to occur at a recurring interval, click
Recurrence and set the interval.
5. Click Save and Close.