Inovonics TapWatch 3 - Manual (Page 34)

Site Information
05855E 33
4.4.4 Repeater Location
Click to enter or edit the building in which the repeater is located. Though this
is optional, entering the location of the repeater is essential in the event of field
service.
4.4.5 TXID
The TXID field displays the factory coded unique identification number of
registered Inovonics transmitters. This field is also used for registration.
To register an Inovonics transmitter:
1. Click the enable RF button to connect to the Inovonics RF gateway.
2. Click on the appropriate TXID field. The system enters registration mode,
and a message appears on the bottom of the screen informing you that it
is waiting for a reset message from the Inovonics transmitter.
3. Press the reset button on the Inovonics transmitter. The TXID field will
populate with the transmitter’s unique identification number.
Note: You will receive a notification if the transmitter’s unique identification number has
already been registered.
4.4.6 Notes
Click to enter or edit notes for the repeater. It is recommended that the location
of the repeater be noted for future maintenance.