Inovonics TapWatch 3 - Manual (Page 57)

Site Information
05855E 56
Note: By default, the RDL8500 will answer on the first incoming ring. This can be
updated on the RDL.
4.7.4.5 Dial area code:
Check the box if the area code is to be dialed with the modem number.
4.7.4.6 Logger IP Address:
Enter or edit the IP address for your data logger.
4.7.5 Advanced Options
4.7.5.1 Reads Period
How often reads are stored, in hours.
4.7.5.2 Site Type (FA Only)
If the site includes an FA network, choose whether the site is conventional or
enhanced.
4.7.5.3 Supervision Window:
The supervision window is the period of time during which all wireless devices
are expected to check in to the receiver. This provides a functional test of the
mesh network. When devices fail to check in, the data logger generates a fault
or trouble signal. Inovonics recommends a 24-hour supervision window.
4.7.5.4 Number of Gateways
Use the dropdown menu to select the number of gateways being used at this
site.
4.7.5.5 Auto purge data after sync
Check this box to, upon synchonization, automatically purge reads and
exceptions up to the number selected in Days (prior to today).
4.7.5.6 Read Periods to Sync
Select the number of days for which data will be collected when reads are
synchronized.