Inovonics TapWatch 3 - Manual (Page 27)

Site Information
05855E 26
• If you are performing a synchronization where there are site configuration
updates in either TapWatch 3 or the data logger, TapWatch 3 will
recommend whether to click Publish or Retrieve. In most cases, the
recommended action is the correct one.
• If you are performing a synchronization where there are site configuration
updates in both TapWatch 3 and the data logger, TapWatch 3 will ask you
which updates to keep. Forced Retrieve will keep the updates from the
data logger; Forced Publish will keep the updates from TapWatch 3. In
most cases it is recommended to click Forced Retrieve.
• If you try to synchronize data with a site that is not registered to
TapWatch.com but which has been selected as a TapWatch.com site on
the Settings screen, a window with a list of blank data loggers will display.
Highlight the appropriate data logger and click Publish.
• If you are publishing to a blank data logger, you will be prompted that
TapWatch 3 detects a site configuration change. The recommended
action is to click Publish.
To synchronize data with the data logger:
1. Navigate to File > Connect > Sync; or, click on the Connect/Sync button.
2. Synchronization progress will display in the status bar.
4.2.3 Export Buildings List
The property list can be exported as a spreadsheet. To export the property list:
1. Highlight a site and navigate to File > Export > Export Property List; or,
right click anywhere on the list of properties and select Export Property
List.
2. To use the default location, click Save; to save the file elsewhere,
navigate a new location.
4.2.4 Building Name
Click on the name of a building to enter or edit the building name of up to 25
alphanumeric characters and/or spaces.
4.2.5 # Apt. Units
Displays the number of units in this building, as entered on the Units screen.
Clicking on this field will take you to the Units screen.