Inovonics TapWatch 3 - Manual (Page 53)

Site Information
05855E 52
4.7.2 Check-In Monitor
Figure 4-10 Check-In Monitor Screen
The check-in monitor displays whether or not the RDL8500 data logger has
heard from a meter or repeater since the time posted at the top of the screen.
The intended use is during installation of a system to monitor if each repeater
and meter registered into the system has transmitted a message and been
heard by the RDL8500/receiver.
4.7.2.1 Timestamp
Displays the date and time when the last check in message was received.
4.7.2.2 Building/Repeater
Displays the building/repeater for the registered device.