KEYENCE DL-RB1A - Manual (Page 16)

14
M
ou
ntin
g an
d Co
nn
ec
tin
g the
D
L-
R
B
1A
2
2-1 Connecting the Unit to Sensor Amplifiers
 Connecting the DL-RB1A to panel mounted sensor amplifiers
1
Connect DL-RB1A to the sensor amplifiers using the optional expansion cable (OP-35361).
2
Remove the sensor amplifier connector with pliers (for DIN rail mounting) from the DL-RB1A unit when
using with panel mounted sensor amplifies and install the expansion connector cover supplied with the unit.
 Connecting to a large display type sensor amplifier
1
Connect the sensor amplifier to the BCD Output Unit DL-RB1A using the optional expansion cable
(OP-35361).
2
Detach the sensor amplifier connector (for DIN rail mount type) of the BCD Output Unit
DL-RB1A with pliers and mount the attached expansion connector.
Caution
• Make sure the expansion cable is securely connected while the unit is
turned off. Turning the power on when the cable is not inserted straight or
firmly connected could damage the unit.
• Removing or inserting the cable while the power is on may damage the unit.
Caution
• Turn OFF the power before connecting the expansion cable and connect
securely. Diagonal or otherwise improper insertion may damage the
equipment.
• Inserting or pulling the cable when the power is turned ON may damage
the equipment.
Remove the
protection sticker.
Expansion cable (cable length: 300 mm) (OP-35361)
Sensor amplifier connector
(for DIN rail mounting
of the DL-RB1A)
Expansion connector cover
Detach the
protection sticker
Detach the
protection sticker
Expansion cable (cable length: 300mm)
Sensor amplifier connector
(for DIN rail mount type)
Expansion connector cover