KEYENCE IB Series - Manual (Page 42)

3-6 Setting the Tolerance Setting Value
3-14
3
B
a
sic O
perat
io
ns
IB-E
This is the method to directly enter the tolerance setting value (HIGH setting value, LOW
setting value).
1
Press the  /  button several times on the main screen. Then display the
HIGH setting value on the sub display (lower level).
"Sub Display (Lower Level)" (page 3-4)
2
Press the  /  button to set the HIGH setting value.
"1. Measurement Mode" (page 4-8)
3
Press the  button once and display the LOW setting value on the sub
display (lower level).
4
Press the  /  button to set the LOW setting value.
"1. Measurement Mode" (page 4-8)
After setting, press the  /  button to return the sub display to the original display
as necessary.
Manual Setting
Item Measurement mode Setting range Default value
HIGH setting
value % mode -999.99 to 999.99 20.00
Dimension mode -99.999 to 99.999 2.000
Item Measurement mode Setting range Default value
LOW setting
value % mode -999.99 to 999.99 10.00
Dimension mode -99.999 to 99.999 1.000
Reference As soon as the HIGH setting value and the LOW setting value are
entered, the judgment and output start with the new setting value.
GO

LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
 HOLD CALC CHECK
[HI]
ON
HIGH setting value
GO
HOLD CALC CHECK

LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT

LOW setting value
[LO]
ON