1 initial setup, Initial setup -2, Initial setup – KEYENCE BL-N90 Series User Manual
Page 22
2-2
2
In
itia
l S
e
tup
2-1
Initial Setup
Before using the BL-N90, the following connections must be set up.
Performing these connections establishes the following communications, enabling the BL-
N90 for use.
•
Connection between communication unit and computer:Wired communication
•
Connection between BL-N90 and communication unit: Wireless communication (Bluetooth)
z
Initial setup
Note
After connecting the communication unit to the computer, be sure to charge
the BL-N90 before use.
1
Connect the power cable to the communication unit. (
2
Connect the communication unit to your computer (
3
Charge the BL-N90 (
4
Establish a connection between the BL-N90 and the communication unit
(
Use the BL-N90 to read the BD address barcode attached to the
communication unit.
5
Initialize settings for the BL-N90 (
Read the initialization barcode using the BL-N90.