KEYENCE BL-N90 Series - Manual (Page 80)

4-26
4
Pr
o
g
ra
m
4-11 Decimal Program Code
Use these barcodes to set the laser off time for trigger switch operation mode ( page 4-
13), reread prevention time ( page 4-17), the number of digits for the limit read digits
function, and when setting the code type ( page 4-18).
After reading the barcode to start the settings for each parameter, scan three numbers to
perform the setting.
• Read the first decimal program code : The buzzer sounds once.
• Read the second decimal program code: The buzzer sounds twice.
• Read the third decimal program code : The buzzer sounds three times.
0 1
2 3
4 5
6 7
8 9