8 checking the connected pair, Checking the connected pair -18, Checking the connected pair – KEYENCE BL-N90 Series User Manual
Page 38
Advertising
2-18
2
In
itia
l S
e
tup
2-8
Checking the Connected Pair
In locations where there are multiple BL-N90, the connected pairs must be verified. For
example, this function can be used when you are unsure which BL-N90 is connected to
which communication unit.
z
Checking the connected pair
After establishing a connection between the BL-N90 and the communication unit, press
the page button on the communication unit.
The BL-N90 acts as follows.
•
All of the LED flash simultaneously
.
•
The buzzer sounds continuously
.
z
Ending verification
Press the page button on the communication unit again to stop the buzzer and LED
flashing on the BL-N90.
Note
After establishing a connection between the BL-N90 and the communication unit, the
blue LED lights up.
Page button
Repeat
Advertising