KEYENCE BL-N90 Series - Manual (Page 91)

-9
Ap
pend
ices
A-4
Dedicated Stand
The dedicated stand (OP-82191) secures the BL-N90 on a desk top when using scanning
where the barcode sheet is brought close for reading (proximity reading).
There are two ways to use the stand.
• Placed on a desk top ( page A-11) • Secured to a fixture ( page A-13)
z
Using the stand
Set the BL-N90 reading mode to "Auto-scan/auto-reading mode" ( page 3-7).
Note
The BL-N90 cannot be charged while in the stand. When not being used for reading,
set the scanner in the communication unit so that it can be recharged ( page 2-11).
Note
Proximity reading can also be used when the BL-N90 is set in the communication unit.
When performing reading with this method, the BL-N90 is already set in the
communication unit, so you do not have to worry about running out of battery power.