KEYENCE BL-N90 Series - Manual (Page 89)

A-3 Using the Wall Mount with the Communication Unit
-7
Ap
pend
ices
2
Pull out the wall mounting hook to rest the BL-N90 on the communication unit.
3
Secure the BL-N90 in place with the wall mounting hook and set it in the communication
unit.
Note
Affix double-sided tape to the position shown in the diagram to help prevent the hook
from accidentally closing.
Note
After performing mounting, set the BL-N90 into the communication unit and check that
the yellow LED is flashing .
1
2
Hook
Fix with double-sided tape