KEYENCE BL-N90 Series - Manual (Page 26)

2-3 Connecting the Communication Unit
2-6
2
In
itia
l S
e
tup
When BL-N9UB is first connected to a computer running Windows 98, the USB driver
installation screen appears. Install the driver by following the directions given on the screen.
Procedure
1
The "Add New Hardware Wizard" dialog appears and the message "This window searches
for new drivers for: USB human interface device" is displayed. Click on the [Next] button.
2
The message "What do you want Windows to do?" is displayed. Select [Search for the best
driver for your device (Recommended).] and click on the [Next] button.
3
Click on the [Next] button. "USB human interface device" is displayed and the message
"Windows driver search for the device: " appears. Click on the [Next] button.
4
Windows begins installing the driver. When installation is complete, the message
"Windows has finished installing the software that your new hardware device requires. "
appears. Click on the [Finish] button.
Installing the USB driver
Note
Connect the barcode reader after turning on the computer. If the barcode reader is
connected with the power off, turn the computer on.
Note The CD-ROM (Windows) may be required depending on the computer environment.