KEYENCE N-410 - Manual (Page 133)

7-17
7-3 Settings
PLC
Link
7
 QJ71C24(N/-R2)
Set the communication conditions with GX-Developer.
("I/O assignment settings" under "PC parameters")
("Switch settings" under "I/O assignment settings" under "PC parameters")
Type Intelligent
Model Attachments
Points 32
Header XY
Header input signal number (hexadecimal) for the
target unit
Setting switch Setting item Setting
Switch 1 (ch1)
or
Switch 2 (ch2)
Operation settings Independent
Data bits 8 bit
Parity Odd (o)
Stop bit length 1 bit
Checksum Yes
Write during RUN Yes
Settings changeable Yes
Communication speed 9600 bit/s
Switch 1 (ch1)
or
Switch 2 (ch2)
Communication protocol MC protocol format 4
Switch 5 Station number setting 0