KEYENCE N-410 - Manual (Page 66)

3-6
N-410 Setting
s
3
3-1 Making Settings
 Slave settings
Register the connection types and ID numbers of the BL/SR/RF Series devices to be connected
to the N-410. The four connection types are as follows.
• N-R4/N-48 + BL Series (SR Series) (Connecting an N-48 or BL-U1 to a BL Series or SR Series
device)
• N-R4/N-48 + RF Series (Connecting an N-48 or BL-U1 to an RF Series device)
• 50RS + BL Series (SR Series) (Connecting an NX-50-RS to a BL Series device)
• 50RS + RF Series (Connecting an NX-50-RS to an RF Series or SR Series device)
After the connection type and ID number are registered, turning on the N-410 in multi-drop mode will
cause polling to begin (auto-polling function). Register only the connection types and do not check
the check boxes when operating manual polling.
"Auto-polling" (Page 4-5)
"Manual Polling" (Page 4-6) Reference