KEYENCE N-410 - Manual (Page 57)

2-8 Installation
Inst
allatio
n
2
2-35
Installing a BL-U1
There are two methods to install a BL-U1.
 Fastening with screws
1
Pull the mounting brackets out of the back of the BL-U1.
2
Fasten the BL-U1 to the with screws.
*The mounting screws are not provided with the device.
 Mounting with DIN rails
1
Ensure that the mounting clamps on the back of the BL-
U1 are as shown in the diagram.
2
Mount the BL-U1 to the DIN rail as shown in the diagram.
Mounting bracket
Mounting hole
(4- φ5)
Pull out
BL-U1
150 mm
98 mm
Mounting screw
Mounting clamp
View from the front
DIN rail
DIN rail
Tab
(1) Hook
Mounting on the DIN rail
Mounting
clamp
(2) Press
Protrusion