KEYENCE N-410 - Manual (Page 48)

2-26
Inst
allatio
n
2
2-6
BL-U1 Connections and Wiring
To use an AC powered BL-U1, use connections like the following.
Electrical Wiring
Connect the BL-U1 power cable to the power outlet.
Use an AC power supply within the range of 240 V AC ± 10% (50 / 60 Hz).
Connecting to a BL/SR/RF Series Device
Connect a BL-700/600/180 Series or 210RK device to the reader board of the BL-U1.
When connecting a BL-1300 Series/SR Series/RF Series device to the BL-U1, use a option D-sub
converter cable.
* The baud rate of a code reader connected to the BL-U1 should be 38400 bps or less.
FG wire
Caution
BL-U1 Computer
RS-232-C cable (OP-22149)
+
Converter connector (OP-25057)
D-Sub converter cable
(RF-CM2D)
(BL-1300, SR:OP-80616)