KEYENCE N-410 - Manual (Page 92)

5-8
Co
nt
ro
lling
Mult
i-h
ead Mo
de
5
5-2 Operating in Multi-head Mode
Data Transmission Timing
Select one of the following triggers to send data to the host computer.
• After read
Data is sent immediately after it has been read.
• After trigger OFF
This sends data when the trigger signal coming into the N-410 is turned off (This occurs after a
set time after measurement if one-shot synchronization has been used).
Trigger input
<When data was read> <When data was not read>
*Read error
Communication
output
Read
Trigger input
<When data was read> <When data was not read>
*Read error
Communication
output
Read