Kofax Front-Office Server 3.0 - Manual (Page 30)

Kofax Front-Office Server Administrator’s Guide
30 Kofax, Inc.
2 Enter the following command:
C:\Windows\Microsoft.NET\Framework\v2.0.50727\caspol -machine -addgroup
All_Code -zone Trusted FullTrust -name "KofaxDesktopScan"
Where: C:\Windows\Microsoft.NET\Framework\v2.0.50727 is the path where Microsoft
.NET Framework 2.0 is installed.
When prompted, confirm that you want to perform the operation.
Note As an alternative to using caspol.exe (Code Access Security Policy Tool), you can
use the Microsoft .NET Framework Configuration tool, if installed on the client
workstation.
X To ensure that the security policy setup takes effect, it is recommended that you close and
then open Internet Explorer before using WebScan for the first time.
Setting Up a Scanner Profile
When you scan from the Web Client using WebScan, scanning is performed with the following:
„
Scan settings (such as resolution or color mode) resident on the scanner, either pre-defined
by the manufacturer or user-defined on the scanner as an override to the manufacturer’s
setting
„
If you are using VRS, image quality (or advanced) settings available in a default profile
installed with VRS
If you prefer to specify scanner settings for WebScan, you can optionally set up a scanner profile
based on whether you are scanning with VRS or the manufacturer’s TWAIN driver (not VRS):
„
When scanning with VRS
Set up a scanner profile, including advanced image quality settings, using a utility called
Twacker. This utility is available with the installation of VRS. For more information, see To
set up a scanner profile when scanning with VRS .
„
When scanning with the manufacturer’s TWAIN driver (not VRS)
Create a scanner profile XML file, based on the scanner profile schema and a sample
scanner profile XML installed with Kofax Front-Office Server. With a valid scanner profile
XML file saved in the appropriate location on the server, the defined scanner settings are
used automatically when scanning from Kofax Front-Office Server Web Client. For more
information, see To set up a scanner profile when scanning with a TWAIN driver (not
VRS) .
A scanner profile XML file needs to be created for each applicable scanner model with
which you want to use a scanner profile.
X To set up a scanner profile when scanning with VRS
1 Make sure VRS is not currently in use on your client workstation. This includes logging
off the Web Client if Kofax Software VRS - TWAIN is the selected scanner setting for
WebScan.
2 On the client workstation, locate and open the Twack_32.exe file.
The file is typically located in the \Windows\Twain_32\Kofax folder.
3 In Twacker, select File | Select Source.
4 In the Sources list, select Kofax Software VRS - TWAIN, and click Select.