AERCO XPC GATEWAY Communications - Manual (Page 116)

GATEWAY COMMUNICATIONS MANUAL
116
SECTION 20 CONFORMANCE STATEMENT FOR LONWORKS
IMPLEMENTATION
Date: 11/22/05
Vendor Name: OEM
Product Names: Extended Protocol Converter
Product Model Number:
XPC
Applications Software Version: HW_Exec_B Firmware Revision: 2.03
Product Description:
The XPC is a general purpose building automation translator with custom programmable functionality,
designed for, communicating through multiple protocols. LonWorks network points are spawned within
the device as a result of downloading graphical control programs. The XPC translator speaks the
LonWorks Protocol as described by Echelon Protocol Specification. Since the translator is custom
programmable it does not conform to LonMark certification. Further details on the LonWorks supported
implementation are described below.
Serial Transmission Mode: Supported?
LonWorks Master or Slave (Slave is the Default Dipswitch setting)
Communication Types: Baud rates: Data Bits: Parity: Stop Bits:
2-wire EIA-485 variable 8 None 1