Gf-122 aerco xpc gateway – AERCO XPC GATEWAY Communications User Manual

Page 81

Advertising
background image

GF-122 AERCO XPC GATEWAY

81

4. Connect the communications wiring to Port 2.

• EIA-232, 2-wire

Connect to Tx, Rx, DTR, DCD, and Gnd using three wire termination with pins 3 and 4 jumpered.
Wiring must go plus-to-minus and minus-to-plus, Gnd-to-Gnd.


Wire Specifications:

• 18–28 AWG; twisted pair preferable
• 50 feet (15.24 meters) maximum length

NOTE

DO NOT POWER THE DEVICE FROM THE SAME TRANSFORMER
THAT POWERS THE XPC.

Advertising