EVCO EVXV815P7 Installer manual - Manual (Page 48)

EVCO S.p.A. EVXV 800 range | Installer manual ver. 1.2 | Code 144XV800E124
page 48 of 66
Defrosting LED.
If it is on:
- defrosting will be in progress.
Pre-cooling LED.
If it is on:
- pre-cooling will be in progress and the cabinet temperature will have reached that established
using parameter r12.
If flashing:
- pre-cooling will be in progress and the cabinet temperature will not have reached that
established using parameter r12.
AUX
Auxiliary LED (in the EVXV805 and EVXV815 models only).
If it is on:
- the cabinet light will be on
- needle probe heating will be in progress
- the UV light will be on.
HACCP
HACCP LED.
If it is on:
- all information regarding HACCP alarms will not have been displayed.
If flashing:
- the device will have memorised at least one new HACCP alarm.
°C
Degree Celsius LED.
If it is on:
- the temperature unit of measurement will be the degree Celsius.
°F
Degree Fahrenheit LED.
If it is on:
- the temperature unit of measurement will be the degree Fahrenheit.
min
Minutes LED.
If it is on:
- the time unit of measurement will be the minute.
On/stand-by LED.
If it is on:
- the device will be in the “stand-by” status.