EVCO EVXV815P7 Installer manual - Manual (Page 57)

EVCO S.p.A. EVXV 800 range | Installer manual ver. 1.2 | Code 144XV800E124
page 57 of 66
13.2.4 Connection to the device
Operate as follows:
1. Insert the EVIF20TSX TTL port into the device communication port.
2. Connect the EVIF20TSX RS-485 port to the network devices monitored and supervised by RICS or EVUSBREC01.
For further information, consult the documentation relative to RICS and EVUSBREC01.
13.3 EVPROG01 connection kit
13.3.1 Introduction
EVPROG01 is a connection kit.
The kit can be used to connect the device to the Parameters Manager set-up software system.
The kit is made up from the following parts:
- non-optoisolated RS-232/TTL serial interface EVIF20TRX
- 1256800042 telephone cable
- 1256800079 adapter
The kit can be used as a powered or non-powered device. In the latter case, the EVPS power supplier must also be
used (to be ordered separately).
13.3.2 Description
The following drawing illustrates the aspect of EVPROG01.