EVCO EVXV815P7 Installer manual - Manual (Page 62)

EVCO S.p.A. EVXV 800 range | Installer manual ver. 1.2 | Code 144XV800E124
page 62 of 66
2 outputs (electromechanical
relays):
- 1 x 30 A res. output @
250 VAC SPST cycles
(K1) for compressor
management
- 1 x 8 A res. output @
250 VAC SPDT cycles
(K2) for defrosting or
evaporator fan
management
5 outputs (electromechanical
relays):
- 1 x 30 A res. output @
250 VAC SPST cycles
(K1) for compressor
management
- 1 x 8 A res. output @
250 VAC SPDT cycles
(K2) for defrosting
management
- 2 x 8 A res. outputs @
250 VAC SPST cycles (K3
and K4) for management
of the evaporator fan
and the door resistances
of the of the condenser
fan
- 1 x 5 A res. output @
250 VAC SPST cycles
(K5) for management of
the cabinet light, needle
probe heating or UV light
The maximum current allowed on the loads is 16 A.
Type of actions and complementary
features:
1C
Communication port: 1 TTL serial port with MODBUS communication protocol