FingerTec AC800 Plus MC - Manual (Page 38)

39
Comm Opt u
4RS232 Yes
RS485
Yes
Note
When RS232 func-
tion is enabled, the
Ethernet will be disa-
bled.
TXD
RXD
GND
Back of Reader Connectors on AC800 Plus RS232 cable PC
and AC800 Plus MC
AC800 Reader Communication I/O controller RS232 cable PC
RS232 Connection
1. Setup of RS232
Access to Menu, select “Options” > “Comm. Opt” > “RS232”, select
“Yes” to enable RS232 function.
2. Turn off the reader.
3. Plug the RS232 cable to the RS232 port of the PC.
4. Plug the RS232 other end to the RS232 joint.
5. Turn the power on.