FingerTec AC800 Plus MC - Manual (Page 49)

50
Welcome Check-In
08:24
07-01-08 Mon
Menu u
User Manage
Options
4 PenDrive Mng
When you see this
|
Do this
OK
6
Plug a flash disk into USB port
of the reader.
Press 2 times
Press once
Press once
Press once
Press 3 times to
return to main menu
PenDrive Mng u
DwnLoad AttLog
DwnLoad User
4 UpLoad User
OK
Copy Data succ
OK
ESC
Upload User
To upload users from FingerTec® reader to a
flash disk, plug in the flash disk into the reader
and press “OK” to start user download from
FingerTec® reader to a flash disk.
ACCESS OPTION
Lock
System requires user to set the FingerTec®
reader to control the time of opening / clos-
ing of electronic locks (EM-Lock). Setting to “0”
means to disable the lock control function. One
quantity unit is equivalent to 20ms (millisec-
ond); a maximum value can be set is 254 which
is 5.08s. Select “Lock” function and press “OK”
to enter Options. Then, press digit keys to enter
corresponding digits. Finally press “ESC” to exit
and to save the settings.
DSEN. Delay
If a door is not closed within a certain period,
the FingerTec¤ reader will trigger the sensor
to alert user. User can configure the timer of
the FingerTec® reader to make sure that the
door will shut properly.
DSEN Mode
There are two modes for door sensor to
choose from; NO is for Normally Open and
NC is for Normally Close. Choosing of NC and
NO is depends on the type of door sensor us-
ing together with FingerTec® readers. To dis-
able the DSEN Mode function, please choose
NONE.