Flintec FT-13 - Manual (Page 20)

FT-13 Technical Manual, Rev. 1.40 March 2013 Page 20 of 56
Process Messages Description
This message is shown on the display during the start delay.
It disappears at the end of the start delay.
Means the filling valve is moving down. It disappears when
the filling valve is completely down.
Means the filling valve is moving up. It disappears when the
filling valve is up.
This message is shown at the end of the filling.
This message and the weight are shown alternately until the
container is removed from the platform.
7.3.3 Programme 2: Below Surface Filling
F T -1 3 F T -1 3
Application:
Foaming materials filling
Oxidizable chemicals filling
Operation:
After activating the start input the filling
valve moves to the bottom and the 2-speed
or 3-speed filling starts
After the “d-Lift ” period the filling valve
moves up and stops at the middle position
until the end of the feeding.
The filling valve moves up and the process
ends after removing the container from the
scale.
Process Parameters Description
+ + + +
When FT- 13 is in “Ready” status (the top LED in the LED
bar is “on” ) press the keys shown on the left sequentially.
“d_FıLL “ means a start delay.
When the start input is activated, the filling starts after the
start delay. This period can be entered by keypad from 0.0
s to 9.9 s. The delay parameter may be helpful for some
special processes.
After the valve gets out of the container, the EOB output is
activated at the end of this delay. It can be set up to 25.0 s.
“d_LıFt “ means a lift delay.
In below surface filling the filling valve first goes to the
bottom and then the filling starts. The filling valve moves up
at the end of the “d_Lift “ period. The lift delay can be set
up to 25.0 s.
“tArE ” is the minimum tare value.
The filling can start if the tare of the container is higher than
this value. It can be entered by numeric keys.
“tArE ” is the maximum tare value.
The filling can start if the tare of the container is smaller
than this value. It can be entered by numeric keys.
XX.X
d_End
− _ _ −
d_LıFt
X
StArt
FULL XXXXX
d_FıLL
X.X
tArE XXXXX
tArE XXXXX
_
−− _