LABEC M-MIA-A - Manual (Page 17)

Ultrasonic milk analyser
If in the process of exploitation there is a need to ask a question the
company-producer, you have to send the data, written on the display during
the above described initialization procedure.
3.2.1.4.Till the analyzer is prepared for work (at about 5 minutes) the
following message is written on the display: “Getting ready”. Above pointed
time is in dependence of the environmental temperature and increases with
decreasing the temperature.
3.2.1.5. When the device is ready for work the display shows: “Ready to
start”.
The analyzer is ready to make analyses in mode 1 (normally Cow)
3.2.1.6. If you want to pass to another mode press the button Enter and hold
it pressed. The following message appears on the display:
Release button to
start menu
Release the button Enter. The display shows the possible working modes:
Milk selector
Cal1 – Cow
Cal2 – Sheep
Cal3 – UHT
------------------------------
Cleaning
Final cleaning
Using “up”▲and ”down”▼buttons, choose the working mode and press Enter
in order to start it.
3.2.2. Making analyses
To start measurement:
- pour the preliminary prepared sample in the sample holder of the
analyzer;
- put the sample holder in the recess of the analyzer;
- press the button Enter.
Operation manual MRC.VER.01-02.10