LABEC M-MIA-A - Manual (Page 48)

Ultrasonic milk analyser
7.2.4.4. Set Amplitude.
Serves for ultrasound amplitude adjustment. It is used under production
conditions or by the customer (after sensor change) according the
instructions in the document SetCell.pdf.
Please, use this menu only after reading the above pointed document
SetCell.pdf
7.2.5. pH meter & Co meter
Ph and conductivity measuring are additional possibilities for the analyser
and are optional. Their usage is described in Appendices PH Measurement
and Conductivity Measurement.
7.2.6. Exit
By pressing the button you may leave the program and pass towards another
menu.
Analyzer Setup
Special
modes
Calibration
Cycle
Reports
Shut Down
Corrections
Calibration 1
Fat
SNF
Density
Lactose
Salts
Proteins
Water
Calibration 2
Fat
SNF
Density
Lactose
Salts
Proteins
Water
Calibration 3
Operation manual MRC.VER.01-02.10