LABEC M-MIA-A - Manual (Page 54)

Ultrasonic milk analyser
This calibration mode is active till the power supply of the device is switched
off i.e. it has to be always set if the device will be calibrated for high fat
measurement.
8.6. Embedded real time clock (option).
On customer’s request, a real time clock could be embedded in the device,
showing astronomical time and date. The clock is powered by battery, so it is
independent on power supply of the device. The advantage of this option is
that on the print out with the measurement results are shown also the exact
time, when the measurement is made, for example:
The embedded clock is controlled by the device’s Setup, from the main menu
Accessories, submenu RT Clock. When chosen, the display shows the
following:
Display Time
Adjust Time
Adjust Date
Exit
Using these menus, the operator has the possibility to show on the display
the current time and date, and if necessary – to adjust them.
The time is shown in the format:
hh:mm:ss
dd:mm:yy
Exit
Operation manual MRC.VER.01-02.10