Ram Trucks 2015 3500 - Owner Manual User Manual

Page 108

Advertising
background image

Installing Child Restraints Using The Top Tether
Anchorage

WARNING!

Do not attach a tether strap for a rear-facing car seat

to any location in front of the car seat, including the

seat frame or a tether anchorage. Only attach the

tether strap of a rear-facing car seat to the tether

anchorage that is approved for that seating position,

located behind the top of the vehicle seat. See the

section “Lower Anchors and Tethers for CHildren

(LATCH) Restraint System” for the location of ap-

proved tether anchorages in your vehicle.

Regular and Mega Cab® Trucks:

In the regular cab truck, the top tether anchorages are

located behind the center and right passenger seats. In

the mega cab truck, the top tether anchorages are located

behind each rear seating position. There is a plastic cover

over each anchorage. To attach the tether strap of the

child restraint:
1. Place the child restraint on the seat and adjust the

tether strap so that it will reach over the seat back,

under the head restraint and to the tether anchor

directly behind the seat.

106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: