Electronic range select (ers) operation – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 495

Advertising
background image

NOTE:

Even if the transmission can be reset, we recom-

mend that you visit your authorized dealer at your

earliest possible convenience. Your authorized dealer has

diagnostic equipment to determine if the problem could

recur.
If the transmission cannot be reset, authorized dealer

service is required.
Electronic Range Select (ERS) Operation
The Electronic Range Select (ERS) shift control allows the

driver to limit the highest available gear when the

transmission is in DRIVE. For example, if you shift the

transmission into 4 (fourth gear), the transmission will

not shift above fourth gear, but will shift through the

lower gears normally.
You can switch between DRIVE and ERS mode at any

vehicle speed. When the shift lever is in the DRIVE

position, the transmission will operate automatically,

shifting between all available gears. Tapping the ERS (-)

switch will activate ERS mode, display the current gear in

the instrument cluster, and maintain that gear as the top

available gear. Once in ERS mode, tapping (-) or (+) will

change the top available gear.

Column Shift Lever

5

STARTING AND OPERATING 493

Advertising
This manual is related to the following products: