Automatic transmission, Tip start feature, Keyless enter-n-go – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 455: Normal starting, Using the engine start/stop button

Advertising
background image

Automatic Transmission

Start the engine with the transmission in PARK position.

Apply the brake before shifting into any driving range.
NOTE:

• This vehicle is equipped with a transmission shift

interlocking system. The brake pedal must be pressed

to shift out of PARK.

• If equipped with an 8 speed transmission starting the

vehicle in NEUTRAL is not possible unless the Manual

Park Release has been activated. For the Manual Park

Release operation refer to Manual Park Release in

“WHAT TO DO IN EMERGENCIES.”

Tip Start Feature
Do not

press the accelerator. Cycle the ignition switch

briefly to the START position and release it. The starter

motor will continue to run but will automatically disen-

gage when the engine is running.

Keyless Enter-N-Go™

This feature allows the driver to oper-

ate the ignition switch with the push

of a button, as long as the Remote

Start/Keyless Enter-N-Go™ Key Fob

is in the passenger compartment.

Normal Starting

Using The ENGINE START/STOP Button

1. The transmission must be in PARK or NEUTRAL.
2. Press and hold the brake pedal while pushing the

ENGINE START/STOP button once.

3. The system takes over and attempts to start the

vehicle. If the vehicle fails to start, the starter will

disengage automatically after 10 seconds.

5

STARTING AND OPERATING 453

Advertising
This manual is related to the following products: