Windshield wiper blades – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 780

Advertising
background image

other underhood services, the hood latch, release mecha-

nism and safety catch should be cleaned and lubricated.
The external lock cylinders should be lubricated twice a

year, preferably in the Fall and Spring. Apply a small

amount of a high quality lubricant, such as MOPAR®

Lock Cylinder Lubricant directly into the lock cylinder.

Windshield Wiper Blades

Clean the rubber edges of the wiper blades and the

windshield periodically with a sponge or soft cloth and a

mild nonabrasive cleaner. This will remove accumula-

tions of salt or road film.
Operation of the wipers on dry glass for long periods

may cause deterioration of the wiper blades. Always use

washer fluid when using the wipers to remove salt or dirt

from a dry windshield.

Avoid using the wiper blades to remove frost or ice from

the windshield. Keep the blade rubber out of contact with

petroleum products such as engine oil, gasoline, etc.
NOTE:

Life expectancy of wiper blades varies depend-

ing on geographical area and frequency of use. Poor

performance of blades may be present with chattering,

marks, water lines or wet spots. If any of these conditions

are present, clean the wiper blades or replace as neces-

sary.
The wiper blades and wiper arms should be inspected

periodically, not just when wiper performance problems

are experienced. This inspection should include the fol-

lowing points:

• Wear Or Uneven Edges
• Foreign Material

778 MAINTAINING YOUR VEHICLE

Advertising
This manual is related to the following products: