Four-wheel drive operation — if equipped, Manually shifted transfer case — if equipped, Four-wheel drive operation — if – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 499: Equipped

Advertising
background image

cause damage to the transmission. The torque con-

verter will refill within five seconds after starting the

engine.

FOUR-WHEEL DRIVE OPERATION — IF
EQUIPPED

Four-wheel drive trucks are equipped with either a

manually shifted transfer case or an electronically shifted

transfer case. Refer to the operating instructions for your

transfer case, located in this section for further informa-

tion.

Manually Shifted Transfer Case — If Equipped

The transfer case provides four mode positions.

• Two-wheel drive high range (2H)
• Four-wheel drive high range (4H)
• Neutral (N)

• Four-wheel drive low range (4L)
This transfer case is intended to be driven in the 2H

position for normal street and highway conditions such

as dry, hard surfaced roads.
When additional traction is required, the 4H and 4L

positions can be used to lock the front and rear drive-

shafts together and force the front and rear wheels to

rotate at the same speed. This is accomplished by simply

moving the shift lever to the desired positions once the

appropriate speed and gear requirements are met refer to

“Shifting Procedure – Manually Shifted Transfer Case” in

this section for further information. The 4H and 4L

positions are intended for loose, slippery road surfaces

only. Driving in the 4H and 4L positions on dry, hard

surfaced roads may cause increased tire wear and dam-

age to the driveline components.
The “Transfer Case Position Indicator Light” in the

instrument cluster will alert the driver that the vehicle is

5

STARTING AND OPERATING 497

Advertising
This manual is related to the following products: