Rear lamp bar id marker (dual rear wheels), If equipped – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 831

Advertising
background image

Rear Lamp Bar ID Marker (Dual Rear Wheels) — If
Equipped

1. Loosen the two screws and the housing to gain access

to the bulb sockets.

2. Turn the socket ¼ turn counterclockwise to access the

bulb.

3. Pull the bulb straight out from the socket.
4. Reverse the procedure for installation of the bulbs and

housing.

Screw Locations

7

MAINTAINING YOUR VEHICLE 829

Advertising
This manual is related to the following products: