Windshield wipers and washers, Windshield wipers, Windshield wiper operation – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 183: Intermittent wiper system

Advertising
background image

WINDSHIELD WIPERS AND WASHERS

Windshield Wipers

The wipers and washers are operated by a switch in the

multifunction lever. Turn the end of the handle to select

the desired wiper speed.

Windshield Wiper Operation

Rotate the end of the lever upward, to the first detent past

the intermittent settings for low-speed wiper operation.

Rotate the end of the lever upward to the second detent

past the intermittent settings for high-speed wiper opera-

tion.

Intermittent Wiper System

The intermittent feature of this system was designed for

use when weather conditions make a single wiping cycle,

with a variable pause between cycles, desirable. For

maximum delay between cycles, rotate the control knob

into the upper end of the delay range.
The delay interval decreases as you rotate the knob until

it enters the low continual speed position. The delay can

be regulated from a maximum of about 18 seconds

between cycles, to a cycle every one second. The delay

intervals will double in duration when the vehicle speed

is 10 mph (16 km/h) or less.

Windshield Wiper/Washer Switch

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181

Advertising
This manual is related to the following products: