Jacking and tire changing 2500 and 3500 series, Trucks – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 719

Advertising
background image

WARNING!

After using the jack and tools, always reinstall them
in the original carrier and location. While driving
you may experience abrupt stopping, rapid accelera-
tion or sharp turns. A loose jack, tools, bracket or
other objects in the vehicle may move around with
force, resulting in serious injury.

Jacking And Tire Changing 2500 And 3500 Series
Trucks

WARNING!

Do not attempt to change a tire on the side of the

vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.

(Continued)

WARNING!

(Continued)

Being under a jacked-up vehicle is dangerous. The

vehicle could slip off the jack and fall on you. You
could be crushed. Never put any part of your body
under a vehicle that is on a jack. If you need to get
under a raised vehicle, take it to a service center
where it can be raised on a lift.

Never start or run the engine while the vehicle is

on a jack.

The jack is designed to be used as a tool for

changing tires only. The jack should not be used to
lift the vehicle for service purposes. The vehicle
should be jacked on a firm level surface only.
Avoid ice or slippery areas.

6

WHAT TO DO IN EMERGENCIES 717

Advertising
This manual is related to the following products: