Reset auto-up, Window lockout switch (4–door models only) – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 50

Advertising
background image

NOTE:

If the window runs into any obstacle during the

auto-closure, it will reverse direction and then go back

down. Remove the obstacle and use the window switch

again to close the window. Any impact due to rough road

conditions may trigger the auto reverse function unex-

pectedly during auto closure. If this happens, pull the

switch lightly to the first detent and hold to close the

window manually.

WARNING!

There is no anti-pinch protection when the window
is almost closed. Be sure to clear all objects from the
window before closing.

Reset Auto-Up
Should the Auto Up feature stop working, the window

may need to be reset. To reset Auto Up:
1. Make sure the door is fully closed.
2. Pull the window switch up to close the window

completely and continue to hold the switch up for an

additional two seconds after the window is closed.

3. Push the window switch down firmly to the second

detent to open the window completely and continue

to hold the switch down for an additional two seconds

after the window is fully open.

Window LOCKOUT Switch (4–Door Models Only)
The window LOCKOUT switch on the driver’s door

allows you to disable the window control on the rear

passenger doors. To disable the window controls on the

rear passenger doors, push the window LOCK button

into the latched or down position. To enable the window

48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising
This manual is related to the following products: