To stow the flat or spare – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 713

Advertising
background image

each nut has been tightened twice. For the correct lug

nut torque refer to “Torque Specifications” in this

section. If in doubt about the correct tightness, have

them checked with a torque wrench by you authorized

dealer or service station.

WARNING!

A loose tire or jack thrown forward in a collision or
hard stop could injure someone in the vehicle. Al-
ways stow the jack parts and the extra tire and wheel
in the places provided.

7. Install the wheel center cap and remove the wheel

blocks. Do not install chrome or aluminum wheel

center caps on the spare wheel. This may result in cap

damage.

8. Lower the jack to its fully closed position. If the bottle

jack will not lower by turning the dial (thumbwheel)

by hand, it may be necessary to use the jack drive tube

in order to lower the jack. Stow the replaced tire, jack,

and tools as previously described.

9. Adjust the tire pressure when possible.
NOTE:

Do not oil wheel studs. For chrome wheels, do

not substitute with chrome plated wheel nuts.
To Stow The Flat Or Spare

NOTE:

Vehicles equipped with aluminum wheels can-

not be stored under the vehicle because the wheel

retainer will not fit through the wheel pilot hole. Secure

the flat tire in the bed of the truck. Have the flat tire

repaired or replaced immediately.

6

WHAT TO DO IN EMERGENCIES 711

Advertising
This manual is related to the following products: