Trailer sway control (tsc) – Ram Trucks 2015 3500 - Owner Manual User Manual

Page 598

Advertising
background image

NOTE:

• The “ESC Activation/Malfunction Indicator Light”

and the “ESC OFF Indicator Light” come on momen-

tarily each time the ignition switch is turned ON.

• Each time the ignition is turned ON, the ESC system

will be ON even if it was turned off previously. Except

for when the vehicle is started while in 4WD Low

Range.

• The ESC system will make buzzing or clicking sounds

when it is active. This is normal; the sounds will stop

when ESC becomes inactive following the maneuver

that caused the ESC activation.

The “ESC OFF Indicator Light” indicates the

Electronic Stability Control (ESC) is in ЉESC

Partial OffЉ or ЉESC Full OffЉ.

Trailer Sway Control (TSC)

The TSC system uses sensors in the vehicle to recognize

an excessively swaying trailer and will take the appro-

priate actions to attempt to stop the sway. The system

may reduce engine power and apply the brake of the

appropriate wheel(s) to counteract the sway of the trailer.

TSC will become active automatically once an excessively

swaying trailer is recognized. No driver action is re-

quired to activate. Note that TSC cannot stop all trailers

from swaying. Always use caution when towing a trailer

and follow the trailer tongue weight recommendations.

Refer to “Trailer Towing” in “Starting and Operating” for

further information. When TSC is functioning, the “ESC

Activation/Malfunction Indicator Light” will flash, the

engine power may be reduced and you may feel the

brakes being applied to individual wheels to attempt to

stop the trailer from swaying. TSC is disabled when the

ESC system is in the “ESC Partial Off” or “ESC Full Off”

modes.

596 STARTING AND OPERATING

Advertising
This manual is related to the following products: